编辑eth0

DEVICE=eth0

TYPE=EthernetONBOOT=yesMASTER=bond0SLAVE=yesBOTTPROTO=none

编辑eth1

DEVICE=eth1ONBOOT=yesMASTER=bond0SLAVE=yesBOTTPROTO=none

编辑bond0

DEVICE=bond0

BOOTPROTO=staticIPADDR=10.10.128.13NETMASK=255.255.192.0GATEWAY=10.10.128.254ONBOOT=YESUSERCTL=no添加模块：

[root@foldg network-scripts]# cat /etc/modprobe.d/bonding.conf

alias  bond0 bondingoptions bonding miimon=100  mode=1

加载模块：

[root@foldg network-scripts]# modprobe bonding

查看网卡模式：

[root@foldg proc]# cat /proc/net/bonding/bond0

Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

Bonding Mode: fault-tolerance (active-backup)

Primary Slave: NoneCurrently Active Slave: eth1MII Status: upMII Polling Interval (ms): 100Up Delay (ms): 0Down Delay (ms): 0

Slave Interface: eth0

MII Status: upSpeed: 1000 MbpsDuplex: fullLink Failure Count: 1Permanent HW addr: 40:f2:e9:b9:ab:68Slave queue ID: 0

Slave Interface: eth1

MII Status: upSpeed: 1000 MbpsDuplex: fullLink Failure Count: 0Permanent HW addr: 40:f2:e9:b9:ab:69Slave queue ID: 0